MEVO
Now Shipping!

Technical Specifications

Features

  1. Control Button
  2. 150 f2.8 Glass Lens
  3. Stereo Microphones
  4. Speaker
  5. Magnetic Base
  1. Wi-Fi Strength
  2. Battery Level
  3. 24 Multi-color LED Light Ring
  4. Internal 1,200mAh Li-ion Battery
  5. Micro-USB
  6. SD Card Slot (16GB SD included)
  7. Reset Button
  8. Accessory Power / Data Connector

General

Manufacturer
Livestream
Packaged Quantity
1 Mevo Camera
Limited Warranty
1 year
Phone Requirements
iPhone 5s with iOS 9 or higher

Video

Sensor
Sony® 4K Sensor
Processor & Encoder (SoC)
Ambarella A9SE
Sensor Resolution
12.4 Megapixels
Capture Resolution
4K - 3840 x 2160 pixels
Aspect Ratio
16:9
Frame Rate
30fps
App Required
Yes, Apple iOS Required
Video Resolution - Capture
4K
Video - MP4 Recording only
720p30 up to 10Mbps
Video - WiFi Streaming and Recording
720p30 up to 4Mbps
Video - LTE Streaming and Recording
720p30 up to 2Mbps
Video - Ethernet Streaming and Recording
720p30 up to 4Mbps
Video Codec
H.264

Built-in Microphone

Microphone Type
Dual analog MEMS, high signal-to-noise ratio (65 dB), matched
Codec
8kHz -192kHz, 8/10/12 bits

Audio

Audio Mixer
Stereo/Mono, Meter, Gain control, 2 inputs - internal stereo microphones and external audio input via iOS
External audio input
Via iOS device 1/8" audio input (over WiFi) - mix internal microphone with external audio input.
Audio codec
AAC

Networking

Wi-Fi
802.11 a/b/g/n @ 2.4Ghz / 5GHz
Access point mode or join an existing Wi-fi network
WiFi Network Required
No, the camera can generate it's own network (access point) and stream via the iPhone LTE connection
Bluetooth
Bluetooth Smart (BLE 4.0) for configuration only
Ethernet
100Mbps ethernet - Requires Mevo Boost accessory
LTE
4G LTE via external Verizon USB Modem. Requires Mevo Boost and supported USB Modem on Verizon (US Only). Or via any phone Wi-Fi hotspot.
Streaming bandwidth requirements
HD live streaming automatically adapts to network conditions (adaptive bitrate) and can use up to 10 Mbps of upload bandwidth. Minimal required bandwidth for smooth HD streaming is 5Mbps upload speed to New York City (NYC). Check your connection using Speedtest.net before purchasing Mevo for live streaming.
Live streaming modes
(a) via phone when using camera access point mode
(b) direct from camera when joining a wifi access point

Dimensions & Weight

Height
63 mm / 2.5 inches
Width / Diameter
50 mm / 2 inches
Weight
130 g / 4.6 ounces
Color
Black or White
Interfaces provided
micro USB 2.0, micro SD slot
Water Resistant
Yes, IPX4 when mounted to Mevo Boost accessory

Power & Battery

Included AC Power Adapter
Input: 100-240VAC 0.2A
Output 5VDC 2.0A
Mevo USB2.0 input: 5VDC, 1.8A
Included USB Cable
Black, Power and data, 3 meters, premium finish.
Built in Rechargeable Battery
Yes
Estimated battery life
Up to 1 hour
Battery Type
Li-Ion, 1200 mAh, 3.7V and 4.44 Wh
Power Accessory
Any USB2.0 battery or Mevo Boost accessory for up to 10 hours of streaming and recording

Exposure and
White Balance

Exposure Metering
Spot
White Balance
Auto or presets
White Balance Presets
1-Incandescent, 2-Sunny, 3-Cloudy, 4-Fluorescent
Exposure Modes
Auto with compensation option
Exposure Compensation
-2, -1.5, -1.0, -0.5, 0.0, 0.5, 1.0, 1.5, 2.0

Lens System

Camera Lense Type
All-glass, f2.8. Focal length 3mm
Field of view
150 degrees (diagonal)
Focus Adjustment
Fixed
Low Lux / Night Mode
No

Memory / Storage

Camcorder Media Type
Flash (Removable)
Memory Card Compatibility
Micro SD (SD, SDHC, SDXC)
Memory Included
Sandisk 16 GB micro SD (Write speed: 50MB/s, Read speed: 80MB/s, Class: U3/SC10) with card adapter

Control Options

Button
One on top of camera. Turn on-off, Start/stop streaming and/or recording (configurable)
Indicator
24 multi-color LEDs ring
Screen, preview and configuration
Via required iOS app
Apple HomeKit
Built-in HomeKit chip for future applications

Miscellaneous

Included Accessories
Mevo mount, charging cable, AC Power Adapter
Underwater depth
NA
Language
English
Six-axis motion sensor
Yes
Operating temperature
35-77°F (2-25°C)
Speaker
1W built-in speaker (mono) for status sounds
Buttons
Power and reset to default